Prepare for Mapping - FR Plans - RA
This User Guide covers the plans settle process for those FR applications within an RA that do not have a COF which is suitable for approval. For those applications with COFs being approved, although the mapping steps will not be required, consideration of the other settle steps is still necessary to ensure that a correct title sheet and cadastral unit is produced.
If the application contains a degree of complexity beyond your grade or level of experience, please follow agreed local processes for referral or re-categorisation upwards.
Process Steps
Additional Information
Make preparations for mapping
2.1 Log in to the Plan Creator.
2.2 In the Plan Viewer (PV), carry out an Index Map search to see if a draft cadastral unit (DCU) has already been created for your particular FR application.
2.3 If a DCU exists for your application number, use the guidance on Re-opening a DCU to open the DCU for editing in the Plan Creator.
2.4 If no DCU exists for your application number, use the guidance on Creating a DCU to open a new DCU for editing in the Plan Creator.
Manually identify the property being registered using the Location Search function - this can be done using the address of the property, an existing title number for a flat in the same block, or by searching on the map.
Ensure the seed point being generated is located within the property being registered.
The UPRN address of the property must be used for the seed point of the subjects, if it exists. If in doubt, please check the LRS.
If no UPRN address exists for the subjects being registered, then locate the seed point within the building within the extent, if one exists; otherwise locate within the extent of the cadastral unit.
2.5 Check if there is OS detail visible for the property being registered.
Check the Basemap Investigation layer to see if newer map detail has been received but is not yet ready for release
If the deed plan suggests that there may be newer OS detail that is significantly different from the versions on the Plan Creator/PV (for example, the site has been redeveloped), the assumption is that RoS do not yet hold the detail and the application may need to be referred to a referral officer to consider how it should be mapped.
2.6 Check the Application for Registration form - Part B to see if the question "If a plans pre-registration report has been issued by the Keeper in connection with this application, please quote the report number" has been answered.
2.6.1 If a report number has been provided on the form, check the Index Map to see if any plotted references or case notes are held in a COF related to that report. Such a COF may provide useful information about the extent of the property, common areas, etc. If you are in doubt about how you should proceed after reading a report, refer to a referral officer for guidance.
2.6.2 A report, and the documents submitted with the report, may also be viewed in the Reports Builder tool - the link to which can be found on the Plans Reports guidance page.
2.7 Read any correspondence that is included with the application and held on the CMS, and take appropriate action.
If you are in doubt about how you should proceed after reading the correspondence, refer to a referral officer for guidance.
Search the index map
2.8 Ensure a thorough interrogation of the index map is done by carrying out an Area search around the full extent of your property, checking any results that are returned in the (i) Title Layer, (ii) the Draft Plans Layer, (iii) the Index Layer. and (iv) the Basemap Investigation Layer.
In addition to the full Index Map search, the Cadastral Check tool may be useful in identifying
(1) those index entries that affect the area your title lies within,
(2) any titles which have rights/burdens affecting your title area, or
(3) neighbouring titles that could be useful when plotting the boundaries of your title.
2.9 Take a note of the research area (RA) number(s) that affect the property being registered.
2.9.1 View the RA instructions in the Plan Creator casenotes.
2.9.1.1 If there are RA mapping instructions and there is a note saying the instructions have been updated for 2012 Act casework, proceed to step 2.9.2.
2.9.1.2 If there are RA mapping instructions but there is not a note saying the instructions have been updated for 2012 Act casework, refer the case to a referral officer so the RA instructions can be re-considered in line with the 2012 Act.
2.9.1.3 If the only instruction in the RA instructions is the "do not investigate before" date, proceed as follows:
2.9.2 RAs often contain general instructions and sometimes more specific mapping instructions regarding both the extent of cadastral units and plans references required.
2.9.3 View the RA extent on the Index layer to determine whether it wholly affects the cadastral unit being registered.
2.9.4 If the cadastral unit being registered falls partly within the extent of more than one RA, take a note of any RA instructions for colour references to be used to show this. Remember to include this information in the LRS title notes.
2.9.5 If the cadastral unit being registered falls partly outwith the RA extent, check for an instruction in the RA to provide a plans reference for the part falling within the RA.
2.10 Check if the cadastral unit being registered is affected by a CIL (Community Interest in Land) entry on the Draft Plan layer.
If it is affected, refer the application to a senior adviser who will check the application against the entry in the RCIL (Register of Community Interest in Land).
2.11 Check if the cadastral unit being registered is affected by a TPO (Tree Preservation Order) entry on the index layer.
If it is affected, take a note of the TPO number and any mapping instructions, or see TPO Plans Guidance page for guidance on which references are needed.
2.12 Check if there are any previously registered servitudes that affect the cadastral unit.
As servitudes may be shown on the ungrouped title layer of the cadastral map or in supplementary data/additional cadastral map views held in groupings, all layers must be checked.
If such a servitude exists, take a note of it.
2.13 Check for previously registered cadastral units (PRs).
2.13.1 Take a note of any nearby PRs for a similar style of property.
2.13.2 Check for any PRs that include part of the cadastral unit that is being registered.
2.14 In the CMS, read any existing Case Notes or Case Collaboration notes in case they give instructions or guidance on how the case is to proceed.